INDUSTRIAL & COMMERCIAL ELECTRICAL | delivery worldwide | contact us

Schneider Electric Altivar 11 ATV11 0.75KW 230V 1PH 1HP HEAT. ASIA (atv11hu18m2a)

Altivar 11 ATV11 0.75KW 230V 1PH 1HP HEAT. ASIA (atv11hu18m2a)

variable speed drive ATV11 - 0.75kW - 230V 1-phase supply - IP20

Available to order
We are an approved distributor

Express UK delivery
Delivery times may vary, please contact us for an expected delivery date

Worldwide delivery

Schneider Electric




range of product
product or component type
Variable speed drive
product specific application
Simple machine
component name
application market
assembly style
With heat sink
EMC filter
Without EMC filter
built-in fan
network number of phases
Single phase
rated supply voltage
200...240 V - 15...10 %
supply frequency
50...60 Hz - 5...5 %
motor power kW
0.75 kW
line current
9.9 A 200 V 1 kA
nominal output current
1.4 A 230 V motor 4 kHz
maximum transient current
6 A 60 s
power dissipation in W
40 W at nominal load
switching frequency
2...16 kHz adjustable
4...16 kHz with derating factor
braking torque
150 % of nominal motor torque with braking resistor at high inertia
20 % of nominal motor torque without braking resistor at no load
80 % of nominal motor torque with braking resistor at no load
asynchronous motor control profile
Sensorless flux vector control with PWM type motor control signal
electrical connection
Terminal 1.5 mm ² AWG 14 AI1, RA-RC, LI1...LI4, DO
Terminal 1.5 mm ² AWG 14 L1, L2, L3, U, V, W, PA, PC
Internal supply for logic inputs 15 V (+/- 15 %) <= 100 mA overload and short-circuit protection
Internal supply for reference potentiometer (2.2 to 10 kOhm) 5...5.25 V DC <= 10 mA overload and short-circuit protection
analogue input type
Configurable current AI1 0...20 mA 250 Ohm
Configurable current AI1 4...20 mA 250 Ohm without adding resistor
Configurable voltage AI1 0...10 V 40000 Ohm
Configurable voltage AI1 0...5 V 40000 Ohm only with internal supply
sampling duration
20 ms AI1 analog
20 ms LI1...LI4 discrete
response time
20 ms DO
linearity error
+/- 1 % output DO
+/- 5 % input AI
discrete input type
Assignable Ll1 forward 5000 Ohm 15 V 24 V
Assignable Ll2 reverse 5000 Ohm 15 V 24 V
Assignable Ll3/Ll4 4 preset speeds 5000 Ohm 15 V 24 V
discrete input logic
Logic input not wired LI1...LI4 < 5 V
Negative logic (source) LI1...LI4 > 11 V
Positive logic (source) LI1...LI4 < 5 V > 11 V
discrete output type
Assignable as external voltage DO 30 V max, 30 mA
Assignable as internal voltage DO
Assignable as open collector logic output DO 100 Ohm, 50 mA max
Factory set as PWM open collector output DO at 2 kHz 10 mA max
Protected relay logic RA-RC 1 NO
minimum switching current
10 mA 24 V DC RA-RC
maximum switching current
2 A 250 V AC inductive cos phi = 0.4 7 ms RA-RC
2 A 30 V DC inductive cos phi = 0.4 7 ms RA-RC
5 A 250 V AC resistive cos phi = 1 RA-RC
5 A 30 V DC resistive cos phi = 1 RA-RC
protection type
Line supply overvoltage drive
Line supply undervoltage drive
Overcurrent between output phases and earth drive
Overheating protection drive
Short-circuit between motor phases drive
Thermal protection motor
frequency resolution
0.1 Hz display unit
Converter A/D, 10 bits analog input
electromagnetic compatibility
1.2/50 µs - 8/20 µs surge immunity test level 3 EN/IEC 61000-4-5
Electrical fast transient/burst immunity test level 4 EN/IEC 61000-4-4
Electrostatic discharge immunity test level 3 EN/IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 EN/IEC 61000-4-3
motor cable length
20 m with additional EMC filter from 2 to 16 kHz EN 55011 class A group 1
5 m with additional EMC filter from 2 to 16 kHz EN 55011 class B
vibration resistance
1 gn 13...200 Hz EN/IEC 60068-2-6
1.5 mm peak to peak 3...13 Hz EN/IEC 60068-2-6
shock resistance
15 gn 11 ms EN/IEC 60068-2-27
relative humidity
5...93 % without condensation IEC 60068-2-3
5...93 % without dripping water IEC 60068-2-3
ambient air temperature for operation
<= 60 °C with current derating of 2.2 % per °C above 50 °C
-10...40 °C without derating
-10...50 °C by removing the protective cover from the top of the drive
operating altitude
<= 1000 m without derating
> 1000 m with current derating 1 % per 100 m


product destination
Asynchronous motors
supply voltage limits
170...264 V
network frequency limits
47.5...63 Hz
speed drive output frequency
0...200 Hz
nominal switching frequency
4 kHz
speed range
transient overtorque
150...170 % of nominal motor torque
regulation loop
Adjustable frequency
Factory-set with the speed loop stability and gain
Possible correction for machines with high resistive torque/inertia/fast cycles
motor slip compensation
Preset in factory
prospective line Isc
1 kA
output voltage
<= 2 x power supply voltage
Electrical between power and control
analogue input number
discrete input number
discrete output number
acceleration and deceleration ramps
Linear from 0 to 99.9 s
braking to standstill
By DC injection
insulation resistance
> 500 MOhm
operating position
Vertical +/- 10 degree
CAD overall width
72 mm
CAD overall height
142 mm
CAD overall depth
145 mm
product weight
1.1 kg


EN 50178
product certifications
IP degree of protection
ambient air temperature for storage
-25...65 °C



Manufacturer's Part Number atv11hu18m2a
Manufacturer Schneider Electric
Range N/A
Pack Quantity N/A
Next day UK delivery N/A


Delivery Promise

  • If an item is not in stock at the time of ordering we will contact you with 24 hours (Mon-Fri).
  • Order before 3pm and we aim to dispatch all stock items the same day.
  • Order after 3pm and we will dispatch all stock items the next working day. If you order after 3pm on a Thursday, we will deliver it on the following Monday.
  • We offer international shipping on all items
  • FREE delivery currently applies to standard 'mainland' areas and excludes the Highlands, Islands and N.Ireland.
  • Items over 10kg may be subject to an extra delivery charge.