Menu
Your Cart
All prices shown excluding VAT

ATV71HU30M3: ATV71 240V 3KW EMC W GRAPHIC TERM by Schneider

ATV71HU30M3: ATV71 240V 3KW EMC W GRAPHIC TERM by Schneider
ATV71HU30M3: ATV71 240V 3KW EMC W GRAPHIC TERM by Schneider
£1,080.00
  • Product Code:: ATV71HU30M3
  • Weight: 6.10kg
  • UPC: 1080
  • JAN: VF

Product Description

range of product
Altivar 71
product or component type
Variable speed drive
product specific application
Complex, high-power machines
component name
ATV71
motor power kW
3 kW at 200...240 V 3 phases
2.2 kW at 200...240 V single phase
motor power hp
3 hp at 200...240 V single phase
motor cable length
<= 50 m shielded cable
<= 100 m unshielded cable
[Us] rated supply voltage
200...240 V (- 15...10 %)
network number of phases
3 phases
Single phase
line current
16.4 A for 240 V 3 phases 3 kW
19.3 A for 200 V 3 phases 3 kW
22.1 A for 240 V single phase 2.2 kW / 3 hp
25.9 A for 200 V single phase 2.2 kW / 3 hp
EMC filter
Integrated
assembly style
With heat sink
apparent power
6.8 kVA at 240 V 3 phases 3 kW
5.3 kVA at 240 V single phase 2.2 kW / 3 hp
prospective line Isc
<= 5 kA, 3 phases
<= 5 kA, single phase
nominal output current
11 A at 4 kHz 230 V single phase 2.2 kW / 3 hp
13.7 A at 4 kHz 230 V 3 phases 3 kW
maximum transient current
22.6 A for 2 s 3 phases 3 kW
16.5 A for 60 s single phase 2.2 kW / 3 hp
18.1 A for 2 s single phase 2.2 kW / 3 hp
20.6 A for 60 s 3 phases 3 kW
speed drive output frequency
0.1...599 Hz
nominal switching frequency
4 kHz
switching frequency
1...16 kHz adjustable
4...16 kHz with derating factor
asynchronous motor control profile
ENA (Energy adaptation) system for unbalanced loads
Flux vector control (FVC) with sensor (current vector)
Sensorless flux vector control (SFVC) (voltage or current vector)
Voltage/frequency ratio (2 or 5 points)
type of polarization
No impedance for Modbus

Complementary

product destination
Asynchronous motors
Synchronous motors
supply voltage limits
170...264 V
supply frequency
50...60 Hz (- 5...5 %)
network frequency limits
47.5...63 Hz
speed range
1...100 for asynchronous motor in open-loop mode, without speed feedback
1...50 for synchronous motor in open-loop mode, without speed feedback
1...1000 for asynchronous motor in closed-loop mode with encoder feedback
speed accuracy
+/- 0.01 % of nominal speed for 0.2 Tn to Tn torque variation in closed-loop mode with encoder feedback
+/- 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback
torque accuracy
+/- 15 % in open-loop mode, without speed feedback
+/- 5 % in closed-loop mode with encoder feedback
transient overtorque
220 % of nominal motor torque +/- 10 % for 2 s
170 % of nominal motor torque +/- 10 % for 60 s every 10 minutes
braking torque
< 150 % with braking or hoist resistor
30 % without braking resistor
synchronous motor control profile
Vector control without speed feedback
regulation loop
Adjustable PI regulator
motor slip compensation
Adjustable
Automatic whatever the load
Not available in voltage/frequency ratio (2 or 5 points)
Suppressable
local signalling
1 LED red presence of drive voltage
output voltage
<= power supply voltage
insulation
Electrical between power and control
type of cable
With a NEMA Type1 kit: 3-strand UL 508 cable at 40 °C, copper 75 °C PVC
With an IP21 or an IP31 kit: 3-strand IEC cable at 40 °C, copper 70 °C PVC
Without mounting kit: 1-strand IEC cable at 45 °C, copper 70 °C PVC
Without mounting kit: 1-strand IEC cable at 45 °C, copper 90 °C XLPE/EPR
electrical connection
AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR terminal 2.5 mm ² / AWG 14
L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB terminal 4 mm ² / AWG 10
tightening torque
AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 0.6 N.m
L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 1.4 N.m / 12.3 lb.in
supply
Internal supply for reference potentiometer (1 to 10 kOhm), 10.5 V DC +/- 5 %, <= 10 mA for overload and short-circuit protection
Internal supply, 24 V DC, voltage limits 21...27 V, <= 200 mA for overload and short-circuit protection
analogue input number
2
analogue input type
AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + sign
AI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bits
AI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits
sampling duration
AI1-/Al1+ 2 ms, +/- 0.5 ms for analog input(s)
Al2 2 ms, +/- 0.5 ms for analog input(s)
LI1...LI5 2 ms, +/- 0.5 ms for discrete input(s)
LI6 (if configured as logic input) 2 ms, +/- 0.5 ms for discrete input(s)
response time
<= 100 ms in STO (Safe Torque Off)
AO1 2 ms, tolerance +/- 0.5 ms for analog output(s)
R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms for discrete output(s)
R2A, R2B 7 ms, tolerance +/- 0.5 ms for discrete output(s)
accuracy
AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °C
AI2 +/- 0.6 % for a temperature variation 60 °C
AO1 +/- 1 % for a temperature variation 60 °C
linearity error
AI1-/Al1+, AI2 +/- 0.15 % of maximum value
AO1 +/- 0.2 %
analogue output number
1
analogue output type
AO1 software-configurable current 0...20 mA, impedance 500 Ohm, resolution 10 bits
AO1 software-configurable logic output 10 V <= 20 mA
AO1 software-configurable voltage 0...10 V DC, impedance 470 Ohm, resolution 10 bits
discrete output number
2
discrete output type
R1A, R1B, R1C configurable relay logic NO/NC, electrical durability 100000 cycles
R2A, R2B configurable relay logic NO, electrical durability 100000 cycles
minimum switching current
Configurable relay logic 3 mA at 24 V DC
maximum switching current
R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1,
R1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1,
R1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4,
R1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4,
discrete input number
7
discrete input type
LI1...LI5: programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm
LI6: switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm
LI6: switch-configurable PTC probe 0...6, impedance: 1500 Ohm
PWR: safety input 24 V DC, impedance: 1500 Ohm conforming to ISO 13849-1 level d
discrete input logic
LI1...LI5 positive logic (source), < 5 V (state 0), > 11 V (state 0)
LI1...LI5 negative logic (sink), > 16 V (state 0), < 10 V (state 0)
LI6 (if configured as logic input) positive logic (source), < 5 V (state 0), > 11 V (state 0)
LI6 (if configured as logic input) negative logic (sink), > 16 V (state 0), < 10 V (state 0)
acceleration and deceleration ramps
Automatic adaptation of ramp if braking capacity exceeded, by using resistor
Linear adjustable separately from 0.01 to 9000 s
S, U or customized
braking to standstill
By DC injection
protection type
Drive against exceeding limit speed
Drive against input phase loss
Drive break on the control circuit
Drive input phase breaks
Drive line supply overvoltage
Drive line supply undervoltage
Drive overcurrent between output phases and earth
Drive overheating protection
Drive overvoltages on the DC bus
Drive short-circuit between motor phases
Drive thermal protection
Motor motor phase break
Motor power removal
Motor thermal protection
insulation resistance
> 1 mOhm at 500 V DC for 1 minute to earth
frequency resolution
Analog input 0.024/50 Hz
Display unit 0.1 Hz
communication port protocol
CANopen
Modbus
type of connector
1 RJ45 for Modbus on front face
1 RJ45 for Modbus on terminal
Male SUB-D 9 on RJ45 for CANopen
physical interface
2-wire RS 485 for Modbus
transmission frame
RTU for Modbus
transmission rate
20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal
9600 bps, 19200 bps for Modbus on front face
data format
8 bits, 1 stop, even parity for Modbus on front face
8 bits, odd even or no configurable parity for Modbus on terminal
number of addresses
1...247 for Modbus
1...127 for CANopen
method of access
Slave for CANopen
marking
CE
operating position
Vertical +/- 10 degree
height
260 mm
depth
187 mm
width
155 mm
product weight
4 kg
option card
CC-Link communication card
Controller inside programmable card
DeviceNet communication card
Ethernet/IP communication card
Fipio communication card
I/O extension card
Interbus-S communication card
Interface card for encoder
Modbus Plus communication card
Modbus TCP communication card
Modbus/Uni-Telway communication card
Overhead crane card
Profibus DP communication card
Profibus DP V1 communication card

Environment

noise level
54.5 dB conforming to 86/188/EEC
dielectric strength
2830 V DC between earth and power terminals
4230 V DC between control and power terminals
electromagnetic compatibility
Conducted radio-frequency immunity test conforming to IEC 61000-4-6 level 3
Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4
Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3
Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 3
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
1.2/50 µs - 8/20 µs surge immunity test conforming to IEC 61000-4-5 level 3
standards
EN 55011 class A group 2
EN 61800-3 environments 1 category C3
EN 61800-3 environments 2 category C3
EN/IEC 61800-3
EN/IEC 61800-5-1
IEC 60721-3-3 class 3C1
IEC 60721-3-3 class 3S2
UL Type 1
product certifications
CSA
C-Tick
GOST
NOM 117
UL
pollution degree
2 conforming to EN/IEC 61800-5-1
IP degree of protection
IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529
IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1
IP21 conforming to EN/IEC 60529
IP21 conforming to EN/IEC 61800-5-1
IP41 on upper part conforming to EN/IEC 60529
IP41 on upper part conforming to EN/IEC 61800-5-1
IP54 on lower part conforming to EN/IEC 60529
IP54 on lower part conforming to EN/IEC 61800-5-1
vibration resistance
1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-6
1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6
shock resistance
15 gn for 11 ms conforming to EN/IEC 60068-2-27
relative humidity
5...95 % without condensation conforming to IEC 60068-2-3
5...95 % without dripping water conforming to IEC 60068-2-3
ambient air temperature for operation
-10...50 °C without derating
ambient air temperature for storage
-25...70 °C
operating altitude
<= 1000 m without derating
1000...3000 m with current derating 1 % per 100 m
General
Datasheet Url <a href=http://eshop.schneider-electric.com/product.aspx?productid=atv71hu30m3&dist=563&org=49&lang=1><img src=https://www.questelectrical.co.uk/image/pdf.png class=pdficon> Download Datasheet</a>
Prices
Pack Qty 1

Write a review

Note: HTML is not translated!
Bad Good